|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Biser-Art, bead embroidery kit of a clock with a base 1818003 Paris
- Finished size: 22x2 cm
- Embroidery size: 18x18 cm
- Number of colours: 14
- Approximate number of beads (pcs): 2062
- Fabric: gabardine
- Embroidery technique: half-cross stitch
The kit for embroidering the clock includes:
- a pattern for bead embroidering the clock on fabric;
- an embroidery base and an MDF frame;
- a clock stand and a wall-mounting part;
- Czech Preciosa beads, first grade, with a surplus;
- bead embroidery instructions;
- beading thread;
- beading needles.
The clock can be either hung on the wall or placed on a table.
The clock mechanism is not included in the kit! It can be ordered separately.
Instructions for assembling the clock:
1. Embroider the clock with beads on the fabric using a half-cross stitch following the pattern.
2. Cut along the contour marked with a dotted line and the centre for the clock mechanism.
3. Using PVA glue (recommended by the manufacturer), glue the embroidered pattern to the base. Apply the glue in a thin layer along the very edge of the pattern. The edge of the fabric should be set back equally from the edges of the base.
4. Apply glue to the frame and glue it to the base in such a way that their edges align perfectly.
5. Press the item (preferably with something heavy) and allow the glue to dry.
6. Install the clock mechanism.
7. Attach the hanger to the wall or assemble the support leg from 2 elements.
Attention! The glue and the brush are not included in the kit.
The colours of the beads and patterns in the photo may differ from the actual colours depending on your device’s screen brightness settings.
The manufacturer reserves the right to change the product’s specifications, the appearance of its components and the colour scheme without prior notice.